Hydrogen EquipmentCharacteristics of Products
We invented the unique flow process of separate circulation which is in process of patent whicHdiffers from the traditional process which H2 separator and O2 separator are connected at bottom through pipeline, the alkaline solution being poured into the electrolyser then is mixed with the gas. In the generator, the alkaline solutions with O2 and H2 are completely separated than higher purity of H2 and O2 are available.
The generators are categorized according to H2 output from 2-400Nm3H2/h with fine steps. .
Operation at high pressure
The aim of hydrogen generator manufacturers and it is an important sign of technical level tooperate under higher pressure: 1.6MPa, 3.2MPa and 5.0MPa.
Thus, the hydrogen compressor and gas tank can be omitted to save investment and increase reliability.
Because power and cooling water for hydrogen compressor are no longer used than the operation cost is lowered.
http://www.tradekey.com/2929296/.
High purity
Because the electrolyser uses unique separate circulation process, hydrogen electrolyte and oxygen electrolyte circulates separately in separate ways, which reduces the mixing possibility of H2 and O2, solved the technical problem of low gas purity of H2 purity99.7-99.8% O2 99.2% respectively.
Low Power Consumption
Because power and cooling water for hydrogen compressor are no longer used than the operation cost is lowered.
http://www.tradekey.com/2929296/.
High purity
Because the electrolyser uses unique separate circulation process, hydrogen electrolyte and oxygen electrolyte circulates separately in separate ways, which reduces the mixing possibility of H2 and O2, solved the technical problem of low gas purity of H2 purity99.7-99.8% O2 99.2% respectively.
Low Power Consumption
Since the main consumption of water electrolysis equipment is electric power, the technology fordecreasing power consumption has been searched for a long time by the manufacturer. Separate circulation process applied on FDQ series equipment increases temperature and flow rate of electrolyte, (to mixed circulation process, the electrolyte flow rate cannot be too large, or the gas purity will decrease because the electrolyte entrains too much gas, the electrolyte flow rate cannot be also too small, otherwise the electrolysis may be dry, causing the electrode plates burned out and poor gas purity, thus increases the operation danger and difficulty), So, saves the electric power cost and improves cooling efficiency, uses less cooling water.
BUY NOW! http://www.tradekey.com/2929296/.
Multiple control mode
Any one of following control modes can be chosen by use: Direct control, Pneumatic instrument
control, Electric instrument control and Microprocessor control.
High Automatic Level and Flexible Operation
Technical parameters such as pressure, pressure difference, temperature and feed water
compensation are automatically controlled. When one of the following problems occurs, the whole
system will alarm or interlock.
Maximum limit of electrolysis pressure and temperature
Low limit of electrolyte flow rate
The temperature of electrolysis is 80-90 degree centigrade at normal condition and drops to ambient temperature after the equipment
is shut down.
is shut down.
With high quality sealing materials, the FDQ series electrolysis can be operated under high
pressure and have 10 years overhaul duration. For other kinds of electrolysis, this is only 3-5 years.
Integration, easy installation and small space occupation.
BUY NOW HERE! SEARCH FOR ELECTROLISYS! http://www.tradekey.com/2929296/.
pressure and have 10 years overhaul duration. For other kinds of electrolysis, this is only 3-5 years.
Integration, easy installation and small space occupation.
BUY NOW HERE! SEARCH FOR ELECTROLISYS! http://www.tradekey.com/2929296/.
c. http://shoppinglinkmania.blogspot.com -low cost products
